Plumbing problems are typical occurrences that even expensive homes experience. While some people think that the progressive aging of their water system is the main reason for such problems, keep in mind that it’s not always the case. At times, it is the wrong system set-ups or improper maintenance processes that lead to plumbing problems.
In this article, we’ll talk about six plumbing problems and their corresponding causes that require professional help from a commercial plumber:
1. Faucets that continuously drip
If you find your faucet is always dripping, you’ll inevitably have a higher water bill if it is not fixed. Not to mention, it can cause extreme annoyance whenever you hear the splash of the water drop to the sink’s surface. Faucets drip endlessly because of damaged washers or O-rings, but you can easily replace it without much help. If the faucet is new, poor installation could be the cause of the drip.
If the leak continues after you’ve tried replacing the washers or O-rings, allow emergency plumbing services to determine the problem area and make a diagnosis. This is because there could be a deeper unseen problem that you may not have noticed.
2. Pipes that leak
There are numerous causes of leaky pipes — incorrect pipe layout, clog, corrosion, joint damage, cracked seal, or excessive water pressure. Regardless of the root cause, plumbing contractors can quickly fix the problem. Remember to call as soon as you can because leaky pipes cause exponential damage if left unrepaired for some time.
3. Toilets that continue to run
If your toilet continues to run water, it can waste up to 200 gallons of water each day. Imagine your water bill skyrocketing with those numbers! Four main reasons induce a running toilet, including refill tube problems, damaged flush valves or flapper seals, damaged flush handles, or flapper chains that’s the wrong size for your model.
4. Water pressure that is too low
If your water pressure is too low, you won’t be able to do anything productive at home. Know that the leading causes of low water pressure are corroded pipes, unseen water leakage, damaged sewer lines, or sewer system clogs.
5. Drains that are clogged or slow in draining
Drains need to function correctly; otherwise, the build-up of dirty water will be harmful to the health of your family. If you have one clogged drain, it might be caused by a localized problem. Debris, such as hair, soap, and other junk, all contribute to the clog. This is why it is essential to conduct routine drain cleaning to avoid these problems in the future.
For multiple clogs, immediately call for plumbing companies as severe problems in the sewer line cause such problems. As a result, a backlash of sewer contents might be inevitable.
6. Sump pumps that fail
Although sump pump failure can be attributed to the unit itself, sometimes that’s not the case. External issues, such as water flooding, clogged drains, poor installation of the pump unit, or progressive aging of the model, are among the top causes of sump pump failures.
Plumbing problems need to be addressed immediately. As time progresses, the extent of the damage will also increases, which then increases the cost of repairs. That said, call for an expert at first sight of the warning signs, as mentioned above.
If you are looking for affordable plumbing services in San Diego, get in touch with us today to see how we can help!